Share :
 

Bean dregs dryer

Brief introduction of bean dregs dryer :
Bean dregs (soybean curb residue) is a kind of bound water, large oil-based materials, the water of material is not easily to remove.
 
Basis on the characteristic of bean dregs,our company spend many people and money special design and developed a complete machinery 
of dehydration dryer system for bean dregs (soybean curb residue).
 
The drying process of this system as below:
 
1.High humidity Bean dregs was dehydrated through high pressure,most of the water is lost at this way just in a minute.
 
2.Then the bean dregs enter into the dryer system.
 
3.Wet Bean dregs and the dry fresh hot air moving in the same direction under the effect of a special scraping wings (pusher plate) and dry-hot wind.
 
4.The drying process is a little long, the temperature is relatively low and the material is running slowly.
 
5.The dryer system is a downstream drying and the outlet temperature below 80°C.
 
6.The whole drying process can fully use the thermal energy and the bean dregs even heated so the bean dregs can have a good color, 
no burning material and low consumption.
 
Mechanical structure and working principle of bean dregs dryer:
 
Bean dregs dryer system consists as below:
 
1. the heat source,         2.feeding machinery,    3.rotary dryer, 
4.discharging machinery,    5.induced draft fan,     6.discharge devices, 
7.dust catcher .      8.distribution cabinet.
 
The wet material is put into the dryer machine after dehydration.Through the stirring of the plate which is in the roller,the material can 
disperse evenly and contact fully with the hot air in the dryer machine,thus quicken the speed of drying, heat transferring and mass transferring.
 
In the process of drying, the material can be sent out by the star unloading valve which is in the other end of the dryer system under the action 
of the gradient plate and the hot mass.The technological and all machinery' parameter, structure of the production line are being careful 
analysis and verified by the experiment of drying bean dregs, we fully take into account the large moisture content, high protein levels, 
big viscous and adopted a series of unique original technology to solve these problem to ensure a perfect drying results.
 
Main features of bean dregs dryer :
1.High degree of mechanization, large production capacity and continuous production.
 
2.Simple and excellent structure, material running smoothly through the cylinder, operating convenience.
 
3.Less mechanical failure, low maintain charge and power consumption
 
4.Drying production line using a special scattered installations to ensure the dryer system's drying effect.
 
5.Use innovative and unique sealing device, and sophisticated keep-warm system.
 
6.Reduce the coal(or other fuel) consumption of the system effectively.
 
7.Whole system holds a good performance of sealing.
 
8.This dryer system with complete dust removal machinery,no dust spilling.
 
 
Whole drying system uses electric centralized control, auto-control of temperature for hot air, high automation and 
convenient operation .Can join in crushing, mixing, granulating, packing, and other follow-up steps after drying to produce
the finished product of bean dregs particle feed.

Technical Parameters of Bean dregs dryer
Model Diameter
(m)
Length
(m)
speed
(r/min)
Installation obliquity
(%) 
Drying temperature
(°c)
Capacity
(t/h)
Motor
(kw)
Weight
(ton)

 
Φ0.8x8 0.8
 
8 3-6 3-5% ≥800 0.6-0.8 3 3
Φ1.0x10 1.0
 
10 3-6 3-5% ≥800 1-1.5 4 7
Φ1.2x10 1.2
 
10 3-6 3-5% ≥800 1.8-2 7.5 14
Φ1.2x12 1.2
 
12 3-6 3-5% ≥800 2-3 11 15
Φ1.5x15 1.5
 
15 3-6 3-5% ≥800 3-3.5 15 20
Φ1.8x18 1.8
 
18 3-6 3-5% ≥800 5.0-5.5 18.5 30
Φ1.8x20 1.8
 
20 3-6 3-5% ≥800 5.5 18.5 33
Φ2.2x20 2.2
 
20 3-6 3-5% ≥800 6.5-7.0 22 56
Φ2.4x20 2.4
 
20 3-6 3-5% ≥800 7.5-8 30 60
Φ2.5x20 2.5
 
20 3-5 3-5% ≥800 8-9 30 63
Φ2.5x25 2.5
 
25 3-5 3-5% ≥800 10-11 37 68
Φ2.8x20 2.8
 
20 3-5 3-5% ≥800 13-15 45 75
Φ2.8x30 2.8
 
30 3-5 3-5% ≥800 18-20 55 83
Φ3.0x20 3.0
 
20 3-5 3-5% ≥800 18-20 55 78
Φ3.0x22 3.0
 
22 3-5 3-5% ≥800 20-25 55 80
Φ3.0x30 3.0
 
30 3-5 3-5% ≥800 25-28 75 90

Bean Dregs Dryer working system:



We're here to help:

Easy ways to get the answers you need.

+86-371-69118722
+86-371-66530852
  • Supply the most current design and technical expertise;Supply parts sales and training service far beyond the initial sale;Your profits with quality parts and expert service.

Jaw crusher is widely used in various materials processing of mining &construction industries, such as it is suit for crushing granite, marble, basalt, limestone, quartz, cobble, iron ore, copper ore, and some other mineral &rocks.

Supply the most current design and technical expertise;Supply parts sales and training service far beyond the initial sale;Your profits with quality parts and expert service.

Projects

TAIDING quarry equipments includes primary crushing machines such as PE series jaw crusher, secondary crushing machines such as impact crusher, fine crushing equipments such as cone crushers and sand making machines such as vsi crusher. Our machines contain not only these stationary crushers . But also portable crushing station. For example crawler type mobile crusher and portable crushing plant.

Related Products: